5
6. SERVICE MODE
6.1 TEST MODE
Outline of Test Mode
The following modes are provided in Test Mode of this unit:
Version Display Mode
Mode for Making All LEDs Light On
Mode for Making All LEDs Light Off
PAD Calibration Mode
Mode for Confirmation of the Buttons
Mode for Confirmation of the VRs(AD Value)
Mode for Confirmation of the Encoders
Touch Panel Confirmation Mode
Device Information Display Mode
Built-in Memory Quick Format
Built-in Memory Write Mode
@ Mode for Confirmation of the Audio Route
> Factory Reset
Startup Method in Test Mode
(1)
(3)
(2)
While pressing the buttons (1) to (3) simultaneously, turn ON the power supply.
Keep pressing the buttons (1) to (3) until the mode for displaying the version will appear on LCD display.
Method for Switching Mode
If you press the button (1), the previous mode will be displayed.
If you press the button (2), the next mode will be displayed.
Method for Quitting the Test Mode
Turn OFF the power supply.
5
6
(PAGE 1 : VERSION)
(PAGE 2 : LED ALL ON, LCD WHITE)
(PAGE 3 : LED ALL OFF, LCD BLACK)
(PAGE 4 : PAD CALIBRATION)
(PAGE 5 : BUTTONS, PADS)
(PAGE 6 : VOLUMES, RIBBON, TEMPO SLIDER)
(PAGE 7 : ENCODERS)
(PAGE 8 : TOUCH PANEL)
(PAGE 9 : ETHER DEVICE)
(PAGE 10 : USB MASS STORAGE)
(PAGE 11 : PRESET SAMPLE COPY)
(PAGE 12 : AUDIO MIDI)
(PAGE 13 : FACTORY RESET)
(1)
(2)
DJS-1000
6
7
(1) SHIFT button
(2) PLAY button
(3) STEP 1 button
(1) BACK button
(2) HOME button
7
8
A
B
C
D
E
F
23
8