Changing the settings
Launching Utilities mode
Be sure to close your DJ application before launching Utilities mode.
1 Disconnect the USB cable from your PC/Mac.
2 Hold both the [CUE] and Play/pause [
and connect the USB cable to your PC/Mac.
Utilities mode launches.
3 Change the settings.
When you change the settings, they will be saved. While saving, the
Performance Pads 1 through 5 on the right deck flash. If you disconnect the
USB cable while the pads are flashing, settings may not be saved.
4 Disconnect the USB cable to turn off the unit.
Utilities mode turns off.
] buttons on the left deck
47
En