Connecting Cnm001 To Canopen Network - Emerson PACSystems RX3i Quick Start Manual

Quick Start Guide
GFK-2837A

2.2. Connecting CNM001 to CANopen Network

The CNM001 module provides a balanced (differential) two-wire
interface over shielded twisted pair cable to the CANopen network.
Maximum cable length is determined by the data rate used. The
CNM001 module does not support multiple masters.
RX3i CPU Node with
CANopen Master
POWER
MOD STATUS
NET STATUS
CNM001
CANOPEN MASTER
STATION ADD
CAN_GND-3
CAN_L_2
CAN_H_7
Bus
Termination
Sample CANopen Network
Hardware Installation
Slave Devices
Section 2
Sep 2019
Bus
Termination
6