Highlight Suppressed Backlight Compensation (Hsblc) - Watec WAT-233 User Manual

3.6.2 Highlight Suppressed Backlight Compensation (HSBLC)

Set the Highlight Suppressed Backlight Compensation (HSBLC). The function reduces the burden on the observer's eyes by masking a strong light
source in the dark place and can improve the deteriorated visibility with a strong light source. Use the LEFT / RIGHT key to select ON / OFF.
*Default : OFF
When ON is selected, pressing the ENTER key will display the HSBLC menu. Move the cursor up or down with the UP / DOWN key and
adjust with the LEFT / RIGHT key in the item you want to adjust.
HSBLC (HSBLC Menu)
CLIP LEVEL
ON
SCALE
○CLIP LEVEL Settings
CLIP LEVEL = 000
○SCALE Settings
SCALE = 005
OFF
Sets the brightness level at masking starts. CLIP LEVEL can be set in the range of 000 - 255.
Lowering the setting value decreases the luminance level at mask processing starts and increasing setting
increases the luminance level at mask processing starts.
*Default : 000
Set exposure compensation. SCALE can be set in the range of 000-015.
In the dark, the dynamic range of the subject becomes wider by reflecting the light source, and the
visibility of the dark area tends to deteriorate. In this case, increase the brightness of the dark area to
improve visibility. Decreasing the set value will make the screen darker and if you increase the screen
the brightness will be corrected.
*Default : 010
LEFT/RIGHT
Operation
LEFT/RIGHT
LEFT/RIGHT
SCALE = 009
30
ON
CLIP LEVEL = 255
SCALE = 012