TP-Link EAP110 Installation Manual page 10
Wireless n access point
Hide thumbs
Also See for EAP110:
- User manual (104 pages) ,
- Installation manual (84 pages) ,
- Quick setup manual (10 pages)
Table of Contents
Advertisement
3. Use a drill with the appropriate size drill bit to drill three 4mm holes for
the pan-head screws, and drill a 10mm hole for the Ethernet cable to feed
through.
4.
Secure the mounting bracket to the ceiling tile using the pan-head screws,
washers and wing nuts, as shown below.
Wing nut
Washer
07
4mm hole for mounting bracket
10mm hole for Ethernet cable feed
Hole to feed the Ethernet cable
Hole to feed the screw
Pan-head screw
Advertisement
Table of Contents
