Windows Xp - AL Tech Mediagate MG-45 Manual

1.2.3 Windows XP

1) Connect the MG-45 to a PC via the USB cable, and
plug in the MG-45's power cable.
2) Click [Settings→Control Panel→ Administrative
Tools→Computer Management→Disk Management] in
Windows. If you cannot find Administrative Tools in the
Control Panel, click " switch to classic view" in the
left – upper corner on your PC's screen.
3) If the [Disk Signature and Upgrade Disk Wizard]
starts, click [Next] to progress for the wizard.
If this wizard does not start, right click the marked left
area of "unallocated drive" (see fig. 4) and start the
wizard.
4) After finishing the [Disk Signature and Upgrade
Disk Wizard], Right-click the 'Unallocated' Drive, and
then, click [Create Partition].
Right Click
for starting
Disk Wizard.
5) Click [Next] at the New Partition Wizard.
6) Check [Primary Partition] and click [Next].
7) Type number that you want to use and click [Next].
8) Assign a drive letter and click [Next].
12