Windows 2000 - AL Tech Mediagate MG-250HD Manual

14) Type "exit " command at "C:\WINDOWS> " and press
[Enter] to return to the Windows screen.
15) Unplug the MG-250HD and plug in again. A new volume will
appear in [My Computer]. Click the right mouse button on
the new volume and select [Format].

1.2.2 Windows 2000

1) Connect the MG-250HD to PC via USB cable, and plug in
the MG-250HD's power cable, if it is required.
2) Select [Start>Settings> Control Panel>Administrative
Tools>Computer Management>Disk Management] in
Windows.
3) If the [Disk Signature and Upgrade Disk Wizard] has started,
click Next to progress with the wizard. If this wizard has
not started, right click the left area of unallocated drive at no.
4 figure, and start the wizard.
4) After finishing the [Disk Signature and Upgrade Disk
Wizard], Right-click the Unallocated Drive. And then, click
[Create Partition].
Right Click for
starting Disk
Wizard.
14