2.2 Connecting the Audio Cable
Connect as shown below with one of three (3) cables.
IF you can not hear sound after connecting the Optical or Coaxial Cable, you have to change audio setup of the MG-250HD to Encoded Digital.
① Stereo : Connecting a Stereo cable to the TV (supplied)
Red
(STEREO-R)
(STEREO-L)
White
② Optical : Connect ing a Optical 5.1Ch cable (Not supplied)
OPTICAL
Do NOT connect Optical and Coaxial cables at the same time.
Connect only one of them!
③ Coaxial : Connecting a Coaxial 5.1Ch cable (Not supplied)
COAXIAL
24
Red
Connect Red jack to TV
(STEREO-R)
(STEREO-L)
Connect White jack to TV
White
Connect Optical cable to a decoder or
audio receiver device
Connect Coaxial cable to a audio
decoder or receiver device