Related Manuals for Vanco EVOLUTION EVEXARC1
Summary of Contents for Vanco EVOLUTION EVEXARC1
- Page 1 HDBaseT™ E X TE N DER with ARC and Digital Audio Breakout Vanco Part Number: EVEXARC1 HDBaseT® Extender with ARC and Digital Audio Breakout www.vanco1.com • 800.626.6445...
- Page 2 DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters.
- Page 3 FEATURES INTRODUCTION The Evolution by Vanco EVEXARC1 HDBaseT Extender with ARC, bi-directional IR, digital audio breakout, and PoC, extends 1080p high definition video and audio signals up to 164ft/50m over a single Cat5e/6. Bi-directional PoC allows the EVEXARC1 to be powered off one power supply, with either the transmitter or receiver to be powered without the use of a power supply.
-
Page 4: Specifications
SPECIFICATIONS Interface (Transmitter) ..........HDMI input, IR output (3.5mm), IR input (3.5mm), RJ45 Ethernet interface, 24V Power Input, SPDIF Optical Audio Output Interface (Receiver) ............ HDMI output, IR output (3.5mm), IR input (3.5mm), RJ45 Ethernet interface, 24V Power Input Video Bandwidth ............Maximum TMDS clock frequency 165MHz, 4.95Gbps Resolution and distance .......... -
Page 5: Panel Descriptions
PANEL DESCRIPTIONS Transmitting Unit Power Indicator DC 24V: Connect the included power supply (PoC feature allows for either Transmitter or Receiver to be plugged into power) HDBaseT Out: Connect a single Cat5e/6 that runs to the display location (home-run cable strongly recommended) HDMI IN: Connect a source such as a Cable box, Blu-ray player, game console, PC, etc. - Page 6 Receving Unit Power Indicator DC 24V: Connect the included power supply (PoC feature allows for either Transmitter or Receiver to be plugged into power) HDBaseT In: Connect a single Cat5e/6 that runs from the source location (home-run cable strongly recommended) HDMI OUT: Connect a display such as an HDTV or HD Projector IR TX: Connect the included IR Transmitter (TX);...
-
Page 7: Connection Diagram
CONNECTION DIAGRAM CONNECT AND OPERATE 1. Connect a source such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. to the HDMI input on the transmitting unit 2. Connect a display such as an HDTV or HD Projector to the HDMI output on the Receiving unit 3. - Page 8 IR PASS-THROUGH The bi-directional IR system allows you to control the source that is connected to the extender unit, from the display; or the display from the source, not simultaneously. There are two important things to note when setting up the IR system: 1.
- Page 9 NOTICE 1. Vanco HDMI and Cat5e/6 cables are strongly recommended for use with this product to ensure best results. 2. Incorrect placement of IR Transmitter and Receiver may result in the failure of the IR extenders. Please check carefully before plugging in the IR extender to the respective IR sockets.
-
Page 10: Troubleshooting
4. If you are still encountering issues, attempt the “hot-plug” concept. With all of the HDMI cables disconnected, turn on the source and plug in the HDMI cable into it’s output, then power up the Vanco unit and plug the HDMI cable into it’s input, finally turn on the display and plug the HDMI cable from the receiver into it. -
Page 11: Limited Warranty
If repairs are needed during the warranty period the purchaser will be required to provide a sales receipt/sales invoice or other acceptable proof of purchase to the seller of this equipment. The seller will then contact Vanco regarding warranty repair or replacement. - Page 12 ® Vanco International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.com...