Realfiction DEEPFRAME ONE Assembly Manual page 6

4. Remove the transport bolts in each side to unlock the OLED Housing from the flight case.
Use the wrench and Umbraco key size 8 for this.
5. When the bolts have been removed, lift the OLED Housing out from the flight case and place it on the floor.
6. Place the spirit level on top and adjust the feet using a spanner size 13 until the OLED Housing is correctly levelled.
7. In the other flight case, take out the first Leg Frame and attach it with 2 bolts in the lowest of the grooves underneath
the OLED Housing, using spanner size 19. Then, take out the second Leg Frame and attach it in the same way.
6