Realfiction DEEPFRAME ONE Assembly Manual page 12

12. Lift the OLED Screen in place, one side at a time, by hinging the bracket to the OLED Mount.
13. Then very gently hinge the other side on, thereby curving the OLED Screen to fit the OLED Mount.
Important: Do not apply pressure to the bottom part of the OLED Screen, instead allow the bottom corner to
bend in a different radius than the top, leaving a wider gap!
14. When both sides are hinged in place, guide the screws through the holes and fasten with the wing nuts and
washers to secure it in place, one side at a time.
15. Mount the 2 Corner Protectors on each side using 2 screws on the side and one from below.
12