Download Print this page

Realfiction DEEPFRAME ONE Assembly Manual page 11

Hide thumbs Also See for DEEPFRAME ONE:

8. Locate the Sound Bar and lift it in place on the Sound Bar Holders. Use the rubber cushions to protect the

Sound Bar. Important: Make sure that the round speakers are free to move up and down when turning the

OLED Screen on and off.

9. Attach the top brackets of the Sound Bar Holders again to secure the Sound Bar in place.

10. Locate the 2 Screen Brackets and remove the wing nuts and washers.

11. On the backside of the OLED Screen, guide the bracket through the bottom of the T-hole first and then

slide it up and out towards the corner of the screen. Secure it in place using a piece of tape. Repeat this for the

other side as well.

Table of Contents