Phoenix Contact Axioline F AXC Series User Manual page 29

Table 2-5 Error codes of the I/O modules [...]
Code Meaning
(hex)
6000 Device software
6300 Parameter set faulty
6301 Device error
6302 Device error
6310 Gerätefehler: Parameterverlust
6320 Parameter table invalid
7000 Additional modules
7300 Encoder error
7305 Encoder error
7610 Receive buffer full
7611 Transmit buffer full
7620 EPROM (device error)
7710 Open circuit at sensor cable
Open circuit
8000 Monitoring
8600 Input error of incremental encoder
8910 Overrange
8920 Underrange
8663_en_03
Remedy
Check the parameterization of the specified device.
Restart the device. Replace the device if the error still
occurs.
Parametrieren Sie den angegebenen Teilnehmer. 
Führen Sie einen Neustart aus. 
Wenn der Fehler weiterhin auftritt, tauschen Sie das
Gerät aus.
Check the parameterization of the specified device.
Check the encoder.
Check the encoder.
Read the receive buffer.
Check the handshake.
Restart the device. Replace the device if the error still
occurs.
Remove the open circuit.
– Check the input signal.
– Remove the short circuit.
– Connect the sensor.
– Adapt the range.
– Check the wiring.
Error codes
29
PHOENIX CONTACT