Enterasys RoamAbout R2 Installation Manual page 62

Hardware Reset to Factory Defaults
8. When the LEDs start blinking, quickly insert and remove something similar to a
toothpick into the small hole on the unit labeled S1.
NetRider Loader indicates a loading status.
9. Click on Close to exit NetRider Loader when the loading is complete.
10. View the console screen. You will see activity on the console screen as the unit resets.
When the reset is complete, the Login screen displays again.
F-6
CAUTION: The NetRider Loader application only indicates when the file
copy is completed, it does not indicate when the upgrade is complete.