Windows Nt - 3Com HomeConnect 3CP3617B User Manual

Dial-Up Networking Errors
Introduction
Using your Modem
Connecting to your
Internet Provider
Uninstall your Modem
Troubleshooting
Glossary
Technical Support
Install Instant Update
http://rcgdsl/pci/pci_online-guide/html/dunerr.htm (1 of 3) [11/17/2000 3:38:38 PM]
I can't connect to my Internet Service
Provider (ISP) or I am receiving Dial-Up
Networking errors
If you are using Microsoft Windows Dial-up Networking
to connect to your Internet Service Provider (ISP)...
You may encounter some errors when attempting to connect using Dial-Up
Networking. Most of the error messages you will see should be self explanatory.
However, there may be occasions when the error message is not truly indicative of the
problem. If you are receiving one of the error messages (reference the number
displayed on the message to the one here) listed below then select that item to view
additional help.
You may need to contact your Service Provider. If you are attempting to connect with
the wrong configuration values, you will receive a Dial-Up Networking error. You will
need to contact your Service Provider to obtain the correct configuration values, and
you may need to contact
Windows
95/98/Me/2k
Error 602
Error 645
Error 650
Error 691
Windows 95/98
Error 602:
This error message may also be displayed under the following circumstances.
1. You may already have two active connections made through the Modem. This is
the maximum amount you can have.
2. Your physical connection to the DSL line is down. This can be verified by using
Technical Support to reconfigure the modem.

Windows NT

Error 692
Error 718