3Com HomeConnect 3CP3617B User Manual page 18

template
http://rcgdsl/pci/pci_online-guide/html/install.htm (9 of 9) [11/17/2000 3:38:34 PM]
HomeConnect ADSL Modem.
If the HomeConnect ADSL Modem has been uninstalled from a Windows 95/98
system, the system will detect the HomeConnect upon restarting the computer (if Plug
& Play was enabled on the modem).
Removing the HomeConnect ADSL Modem
WARNING: Don't shock yourself. Unplug the computer and any attached
equipment before you uninstall the HomeConnect ADSL Modem.
1 Turn off and unplug the computer, then remove the computer cover. You don't need
to disconnect anything but the power. If you don't know how to remove the cover, see
your computer user's guide.
CAUTION: Don't damage the HomeConnect ADSL Modem with static
electricity. Ground yourself by touching the computer's metal back or side panel.
2 Remove the screw holding the metal bracket for the HomeConnect ADSL Modem.
Ground yourself by touching the metal part of the computer case, and remove the
HomeConnect ADSL Modem by grabbing the nonmetallic sides of the card.
3 Replace the bracket that was removed prior to the installation of the HomeConnect
ADSL Modem.