Windows Nt; Plug And Play (Pnp) Installation - 3Com U.S. Robotics 56K Winmodem Manual

I
NSTALLING THE
W
INDOWS
Plug and Play (PNP)
Installation
Simply plug your new modem into your
computer, power up, and be ready to work.
The operating system does all the work of
recognizing and configuring the modem for
you. The modem must be installed before
any software is loaded.
Your 3Com U.S. Robotics® modem is a
Plug and Play device. However, Plug and
Play will not work if you do not have
resources available or if devices on your
system are not reporting resource usage
correctly. Your modem requires one COM
port and one IRQ setting, Verify that your
system has the necessary resources before
installing the modem.
W
INMODEM WITH
98, W
AND INDOWS
Determining Available
Resources
Windows 95 and Windows 98 Windows 95 and Windows 98 Windows 95 and Windows 98 Windows 95 and Windows 98
Your modem requires one COM port and
one IRQ setting. Here is how you can verify
that your system has the necessary
resources before installing the modem.
1.
Click Start, point to Settings, and then
click Control Panel.
2.
Double-click the System icon.
3.
When the " System Properties" screen
appears, click the Device Manager tab.
4.
Double-click Computer and the
" Computer Properties" screen appears.
®
W 95,
INDOWS
NT 4.0
7