Setting Up An Echo Server - 3Com EtherLink 3C529 User Manual

6-10 Troubleshooting

Setting Up an Echo Server

If your echo server contains the 3C529 or 3C529-TP
adapter, select the Echo Server menu item under the Test
menu, and select the <Start> command button to make
the computer an echo server.
If you are setting up an echo server using a 3Com adapter
other than the 3C529 or 3C529-TP adapter, follow
these steps.
1. Select a computer to use as an echo server.
Make sure that the computer is connected to an
inactive network.
2. Insert the EtherDisk diskette containing the 3Com
adapter diagnostic program in a floppy drive.
3. Start the diagnostic program on the echo server.
The diagnostic program that you use depends upon
the adapter board that is installed in the echo server.
Enter 3CXXX, selecting the appropriate program
from the following list:
Diagnostic
Program
3C503
3C505
3C507
3C5X9CFG
3C523
3C523TP
3C527
Adapter
EtherLink II ® or II TP,
EtherLink II/16 or II/16 TP
EtherLink Plus ®
EtherLink 16 or EtherLink 16 TP
All EtherLink III adapters
EtherLink/MC
EtherLink/MC TP
EtherLink/MC 32