Auto Installing The 3C529 Adapter Drivers For A Netware Nos - 3Com EtherLink 3C529 User Manual

5-2 Installing the Network Drivers
Your computer must have only one 3C529 adapter
installed in it.
Your computer must be intended for use as a DOS
client.
Performing the AutoLink auto installation procedure
from the EtherDisk diskette accomplishes the following:
Installs all necessary NetWare DOS client software
Automatically logs onto the server and updates the
client software if your system administrator has
already configured a 3Install account on your server
Modifies the CONFIG.SYS and AUTOEXEC.BAT
files for NetWare users
Auto Installing the 3C529 Adapter Drivers
for a NetWare NOS
Follow these steps to install the Novell NetWare network
drivers automatically if your network environment meets
the NOS requirements described above.
1. Make sure that you have installed and configured
the adapter, booted the computer under DOS, and
have connected your computer to the network.
2. If the EtherDisk diskette is already in your floppy
drive, go directly to step 7. Otherwise, insert the
EtherDisk diskette in a floppy drive on your
computer.
3. Make that drive the current drive.
For example, if the diskette drive is A, type the
following command:
A: [Enter]