3Com EtherLink 3C529 User Manual page 35

3-2 Changing the 3C529 Adapter Options
2. Place the EtherDisk diskette in a floppy drive on
your computer and make that drive the current
drive.
For example, if the diskette drive is A, type the
following command:
A: [Enter]
3. Type at the prompt:
INSTALL [Enter]
4. The first time you use the diskette to install an
adapter, a license screen appears. To accept the
terms and conditions of the 3Com end-user
software license agreement, type the following:
Y
NOTE: To view the full text of the license agreement,
press [F1].
The auto installation screen shown in Figure 3-1
appears.
5. Read the screen and press [Enter].
6. When the main menu screen shown in Figure 3-2
appears, select Configuration/Diagnostic/
Troubleshooting and press [Enter].