3Com EtherLink 3C529 User Manual page 33

Verifying or Changing the
Computer's Configuration
To verify your computer's configuration, select View
Configuration from the main menu on the PS/2 Reference
Diskette. The computer's configuration is displayed.
To change your computer's configuration, follow these steps:
1. Select Set Configuration from the main menu.
The Set Configuration menu is displayed.
2. Select Change Configuration.
The program displays the computer's configuration,
which includes the settings for the adapter and the slot
it is installed in. Confirm that these are the configu-
ration settings you want. If you need help, press [F1].
If you want to change the configuration settings, use
the arrow keys to select a setting and press [F5] or [F6]
to scroll through a list of the available choices.
NOTE: If you are using an external transceiver, be
sure to set Transceiver Type to External.
3. To save your settings press [F10]. Then press
[Enter].
4. Press [F3] to return to the Set Configuration menu.
5. Press [F3] again to exit the program.
6. Remove the copy of the PS/2 Reference Diskette.
7. Press [Enter] to reboot your computer under DOS.
Proceed to Chapter 3 if you want to change the adapter
options. Otherwise, proceed to Chapter 4, "Connecting to
the Network."
Configuring Your Computer 2-3