Installing And Connecting The Nic; Hardware Requirements; Safety Precautions - 3Com 3C2000 User Manual

2

Installing and Connecting the NIC

Before installing the NIC, make sure your PC meets the requirements listed below.

Hardware Requirements

• Pentium-based PC that meets software requirements for the following operating
systems:
• Windows XP with latest service pack
• Windows 2000 with latest service pack
• Windows Me with latest service pack
• Windows 98 SE with latest service pack
• Windows NT 4.0 with latest service pack
• Linux 2.4
• Novell NetWare 5.1 or 6.0
• One open PCI slot
• PCI v2.2 33/66 MHz
• 128 MB RAM (minimum)

Safety Precautions

Observe the following safety precautions.
WARNING: The NIC is being installed in a system that operates with voltages
that can be lethal. Before you remove the cover of your system, you must
observe the following precautions to protect yourself and to prevent damage to
the system components:
• Remove any metallic objects or jewelry from your hands and wrists.
• Use only insulated or nonconducting tools.
• Verify that the system is powered off and unplugged before removing the
cover.
• Install or remove the NIC in a static-free environment only. The use of a
properly grounded wrist strap (or other personal anti-static device) and an
anti-static mat are strongly recommended.
3