Advertisement
The registration process using WPS takes a few
z
minutes. After completion of the registration of the
access point, check that the proper connection to the
access point is acquired.
As for the manual registration of an access point, this
z
function supports WEP, WPA/WPA2 PSK and
802.1xEAP as the security setting.
If you connect to an access point which is not
z
connected to the Internet, [
communication may be made by mobile networks, not
Wi-Fi connection.
To make Wi-Fi communication by using such an
access point, disable [Avoid poor connections] of
Advanced options before connecting to the access
point.
] is displayed and the
Detailed settings
„
1
In the standby screen,
[Wi-Fi]
2
z▶[Advanced]
3
Select an item
Scanning always
„
Location Information or network scanning from apps
even when [Wi-Fi settings] is off.
Network
notification: Set whether to display a
„
notification icon when an open network is detected.
y Set it after setting [Wi-Fi settings] to On.
Wi-Fi sleep
policy: Set whether to disconnect Wi-Fi
„
when the display is turned off.
Avoid poor
connections: Set whether to use the
„
Wi-Fi function only when stable Internet
connections are available.
„ Handover: Set whether to use handover.
Install
certificates: Install certificates.
„
Wi-Fi
Direct: For details
„
MAC
address: Confirm the MAC address.
„
IP
address: Confirm the IP address.
„
74
z▶[Settings]▶
available: Set whether to use
☞
P. 75"Wi-Fi Direct"
Before Using the Handset
Advertisement
