Advertisement
Sending/Receiving via Bluetooth
communication
Sending data
„
Example: Still picture
1
In the standby screen, z▶[Data]
2
Select a still picture
3
z▶[Send]▶[Bluetooth]
z Set the receiver's Bluetooth device to the reception
stand-by status.
4
Select a Bluetooth to connect to
Receiving data
„
1
Data is sent from the sender's Bluetooth
device
2
In the standby screen, p▶Select the
status bar▶Select the incoming
notification▶[ACCEPT]
3
In the standby screen, p▶Select the
status bar▶Select the receiving
notification▶Select the received data
Receiving all data may not be available depending on
z
the data type.
When available space in the save destination
z
becomes insufficient while receiving data, the data
being received to that point are saved and receiving
ends.
165
Data communication
Advertisement
