Download Print this page

Sharp Aquos SH-02K Instruction Manual page 191

Advertisement

different phone number from that of the other party is
notified/Functions to use details saved in the
phonebook or Caller ID notification are not activated
y The caller ID is not displayed on the handset even
though the other party makes a call with the caller ID
set to be notified if the used network or network
operator does not notify. In addition, a different
phone number from that of the other party may be
notified depending on the used network or network
operator.
Data management
z Data is not transferred
y Make sure a USB HUB is not used. If used, the
transference may not be carried out normally.
P. 155"Connecting the handset and PC"
z Data saved on microSD Card is not displayed
y Remove microSD Card and insert it again.
P. 55"microSD Card"
z Images are not displayed correctly
y [
] is displayed when the image data is damaged.
Bluetooth function
z Cannot connect with Bluetooth connection compatible
device/Cannot find it even if searching
y Set the Bluetooth connection compatible device
(commercially available) side to the registration
stand-by status and register it from the handset
side. To delete the registered device once and
register it again, both the Bluetooth connection
compatible device (commercially available) and the
handset are required to be deleted on each side.
P. 163"Using Bluetooth function"
z Calls cannot be made from the handset with an
external device such as a car navigation system or
hands-free device connected
y Making a call to a phone number may become
unavailable if you make multiple calls to the phone
number in the condition that the other party does
not answer or outside the service area. In this case,
turn off the handset power and turn it on again.
P. 64"Turning power on/off"
189
Appendix/Index

Advertisement

loading