Sharp Aquos SH-02K Instruction Manual page 142

Disabling PIN lock
1
In the PIN locking screen, enter PUK (PIN
Unlock Key)
2
Enter a new PIN code
3
Enter the new PIN code again
Advanced settings
1
In the standby screen,
[Security]▶[Advanced settings]
2
Select an item
Encrypt phone: For details
„
handset"
Device administrator: Set the device administrator
„
function for apps.
Storage type: Display the storage type.
„
Use secure credentials: Allow access to secure
„
certificates and other credentials.
Install certificates: Install encrypted certificates.
„
Clear credentials: Delete all credentials.
„
Screen pinning: Apps other than the selected app
„
cannot be used. For instructions
the used apps history"
Apps with usage
„
access usage history.
z▶[Settings]▶
☞
P. 140"Encrypting
☞
P. 77"Using
access: Set which apps can
Encrypting handset
„
Encrypt data on the handset.
z To cancel handset encryption, you must perform Reset
☞
all ( P. 152"Reset all").
z Charge handset during operation, and after adequately
charging the battery.
1
In the standby screen,
[Security]▶[Advanced settings]
2
[Encrypt phone]
z If Screen lock is set to [Lock No.]/[Password],
unlock the screen.
3
[Encrypt phone]
z If Screen lock is set to [Lock No.]/[Password],
unlock the screen when turning the power on.
y Once the handset is encrypted, you can select
when setting Screen lock whether to unlock the
screen when turning the power on (
P. 135"Security").
Stopping the encryption process part way will cause
z
all data in the handset to be deleted. Use caution.
If unlocking the screen upon turning the power on and
z
you enter lock number/password incorrectly 10 times
and 20 times in a row, the handset will no longer
accept input until you turn the handset off and back
on. Entering incorrectly 30 times in a row will initialize
the handset. Use caution.
140
z▶[Settings]▶
☞
Handset Settings