Advertisement
z Clean only with a soft and dry cloth (such as the type
used for eyeglasses).
z Be sure to back up the data you saved in the docomo
nano UIM card on a microSD card, PC or cloud service,
or keep a separate note.
Note that DOCOMO assumes no responsibility for any
loss of saved contents of data.
z To protect the environment, please take any unneeded
docomo nano UIM cards to a sales outlet such as a
docomo Shop.
z Do not damage, touch haphazardly or short-circuit the
IC.
May cause data loss or a malfunction.
z Do not drop or otherwise subject the docomo nano
UIM card to severe impact.
May cause malfunction.
z Never bend the docomo nano UIM card or place heavy
objects on it.
May cause malfunction.
z Do not install docomo nano UIM card into the terminal
with a label or sticker put on.
May cause malfunction.
Notes on using Bluetooth function
„ The handset supports the security function that
meets the Bluetooth specification for security during
communication using Bluetooth functions. However,
the security may not be sufficient depending on the
configuration etc. Take care of the security while
making communication using Bluetooth function.
„ Even if any leak of data or information occurs while
making communication using Bluetooth function,
DOCOMO shall not be liable for any loss of content.
z Radio frequencies
To check radio frequencies the Bluetooth function of
the handset uses: In the standby screen,
[Settings]▶[Other settings]▶[Device
[Authentication]. Label markings are as follows.
①
① 2.4: This radio equipment uses the 2,400 MHz
band.
② FH: The modulation system is the FH-SS system.
③ 1: The estimated coverage distance is 10 m or less.
④ XX: Another modulation system is used.
⑤ 4: The estimated coverage distance is 40m or less.
⑥
: All radio frequencies between 2,400
MHz and 2,483.5 MHz are used and the frequencies
for mobile object identifiers cannot be avoided.
23
z▶
info]▶
②
③
④
⑤
⑥
Contents/Precautions
Advertisement
