Advertisement
Reserve update of software
You can change a time for software rewrite if you want
to set a different time for installing update files.
1
Display the rewrite notice screen▶[Set
Time]
2
Enter the time▶[OK]
When reserved time arrives
„
When the start time arrives, the rewrite screen appears.
The software rewrite automatically starts after
approximately 10 seconds.
During update, no key operations are available. It is
z
not possible to cancel update.
If software cannot be updated at the start time,
z
software is updated at the same time of the following
day.
Software is updated even if the alarm or another
z
function is activated at the same time as the
reserved time.
When SH-02K is turned off at the start time, software
z
is updated at the same time as reserved time after
turning on the power.
When the start time arrives and "Software update
z
aborted due to insufficient internal storage space.
Please secure storage space (main/external) and
retry." is displayed in the standby screen, check the
amount of available memory, and then start the
software update again.
When the start time arrives and "Software update
z
aborted. Please check the status of the terminal and
retry." is displayed in the standby screen, check if any
of the following have occurred, and then start the
software update again.
y Out of service area
y Battery removed
y Conflict with other function
y Other (handset issue)
197
Appendix/Index
Advertisement
