Advertisement
P. 64"Turning power on"
z Screen response is slow when pressing keys
y This may happen when a great deal of data is saved
on the handset, when a large amount of data is
being transferred between the handset and the
microSD Card, etc.
z docomo nano UIM card is not recognized
y Is the docomo nano UIM card inserted facing right
☞
direction?
P. 51"docomo nano UIM card"
z Clock is incorrect
y Clock may become incorrect if the power is left
turned on for a long time. Make sure [Auto date &
time] is enabled and turn the power on again in a
location with good signal conditions.
P. 148"Date & time"
☞
P. 149"Storage"
☞
z Handset operation is unstable
y The apps installed on the handset after purchase
may become a cause. If you can improve the
symptoms by activating the handset with the safe
mode set, you may be able to improve the symptoms
by uninstalling the installed apps.
* The safe mode is a function to activate the
handset nearly in the state of default.
y For activating the safe mode
Turn the power on again when the power is turned
off, then keep pressing & on the screen during
activation until the standby screen is displayed.
* Alternatively, H while the power is turned on (for
at least 1 second)▶Point the cursor to [Power
off]▶t (for at least 1 second)▶[OK] to activate
the safe mode.
You can also restart the handset in the safe
mode from Self check.
* When the safe mode is activated, [Safe mode] is
displayed at the bottom left of the screen.
* To deactivate the safe mode, turn the power on
again.
y Back up the necessary data in advance before
using the safe mode.
y Widgets created by yourself may disappear.
y The safe mode is not an ordinary activating state
and thus deactivate the safe mode if you want to
use in an ordinary way.
186
☞
P. 149"Self check"
Appendix/Index
Advertisement
