Caller Id; Internal And External Caller Id - 3Com 3101 User Manual

Caller ID

Internal and External
Caller ID
2 Press the # key.
3 Dial the account code that has been assigned by your administrator, and
then press the # key.
The NBX system records the account code and completes the call:
The account name, if known, displays. If the account code is incorrect,
you are prompted to enter it again.
On a 3Com Entry Telephone or analog telephone, if the account code
is incorrect you may have to dial the phone number, press #, dial the
correct account code, and press # again.
To enter an account code at any time before or during an incoming or
outgoing call:
1 Press Feature + 888.
2 Dial the account code that has been assigned by your administrator, and
then press the # key.
The NBX system records the account code and applies it to:
The next call, if you activate the Account Codes feature before a call
arrives at your telephone
The current call, if you activate the Account Codes feature during a
call
Your administrator can set up your NBX system to allow for Internal and
External Caller ID or can configure the system so that you can block your
identity (telephone number) from anyone you call.
By default, the NBX system shows the extension and name of any internal
caller on the display panel of your 3Com Telephone.
External Caller ID provides the same information for external incoming
calls if your organization subscribes to the service from your local
telephone company and if the caller has not blocked the information
from being sent to the NBX system.
Availability and service charges for External Caller ID vary by location.
Caller ID 81