Operating Concept; Central Control Knob - Dräger Vamos Operating Instructions Manual

Operating Concept

Central Control Knob

The central control element is the turn-and-press "dial knob",
which has two functions:
1 Turn knob for selecting/setting
2 Press knob for confirming selections/settings.
Switch the monitor on with the ON/OFF switch on the back
panel. After the self-test, Vamos enters Standby mode.
3 The yellow LED in the »
3 Switch to Operating mode with the »
The selection menu for volatile anesthetic agents is now
displayed. The previously selected anesthetic agent is marked
by an arrow.
The monitor prompts you to select the anesthetic agent used:
Halothane
Enflurane
Isoflurane
Sevoflurane
Desflurane
Turn dial knob to select the anesthetic agent.
The selected anesthetic agent is highlighted in black on an
orange background.
Press dial knob to confirm. The confirmed new anesthetic
agent is now displayed in orange on black and is marked by
an arrow.
To return to the main menu:
Press dial knob.
Parameters can be set from the main menu.
Turn or press dial knob to select main menu.
Turn dial knob to select a parameter in the main menu.
The selected parameter is highlighted in black characters
on an orange background.
Press dial knob to open the parameter menu.
Turn dial knob to set parameter.
Press dial knob to confirm parameter.
The confirmed parameter is displayed in orange on black
and is marked by an arrow.
Press dial knob to return to the main menu.
Press dial knob to return to the display of measurements.
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
« key lights up.
« key.
RETURN TO CD-ROM TABLE OF CONTENTS
D
Vamos
Agent
Hal
Enf
Iso
Sev
Des
F
i
Hal – – N2O
[%] – – [%]
F
et
Alarm
Agent
CO2
SpO2
Sound
Param. Config.
Cal
F 0.6
i
Hal N2O
0.1
[%] [%]
F
et
Operating Concept
Central Control Knob
3
1
2
exit
98
SpO2
[%]
Pulse 110
[1/min]
– – CO2 – –
– – [%] – –
98
exit
SpO2
[%]
110
Pulse
[1/min]
30 0.0
CO2
25 4.5
[%]
11