Click on 【Advanced】→【Firmware Update】 to access the following interface.
In the "Firmware Update", the user can click on "Scan" to select the update file; click on Upgrade to update the system
automatically. If the update file does not correspond to the device, the update will not be performed.
Note: The firmware update procedure will last approximately 5 minutes. Do not interrupt the power supply or disconnect from
the network during the update.
4)
Load Default
Click on 【Advanced】→【Load Default】 to access the following interface.
Select "Reset factory settings" and press the Save button to restore all default setting except for: network parameters (LAN
and Wireless), user Password, NTP, DST, channel name.
Select "Full Reset factory settings" and press the button Save to restore the factory default settings.
Click on "Reboot" and press the button Save to restart the device.
DS1099-077
29