Table of Contents
Advertisement
o
Color Mode or Daytime: fixed setting as colors only, it never switches to B/W picture.
o
Black & White Mode or Night: fixed setting as B/W only, it never switches to color picture.
o
Video Mode or Active Mode: the camera switches from colors to black and white (turning on the IR LEDs) and
vice versa based on the brightness level detected by the video sensor.
o
Time Mode or Timing: the camera switches from colors to black and white (turning on the IR LEDs) and vice
versa based on the set time schedule
➢
IR-CUT Delay: This is the IRcut delay time.
➢
IR-CUT Reverse: Enable/Disable the inversion of the functionality
➢
Image setting: This is used to adjust brightness, contrast saturation, hue, sharpness.
➢
BLC (Back light compensation): This is used to Enable/Disable backlight compensation. This function can
compensate the shadows on the subject in case of exposure against sunlight. In some scenarios of use, the visual
field may contain a very bright background, such as a door or a window in full sunlight, with the observed subject
surrounded by the light field. In this case, the picture may appear dark and flat. Backlighting compensation may be
used to solve this problem.
➢
3D Noise Reduction: Auto/Week/Normal/Strong
➢
WDR: This enables or disables the WDR function: Weak, Normal, Strong.
WDR allows the camera to acquire highly contrasted images. In short, DR (dynamic range) shows the details of the
light part and the dark part of the image. A broader dynamic range shows richer layers and a vaster colour range.
➢
Flip: 4 modes: Close, Leftright, Updown, Center.
➢
White Balance: Auto, Manual, Incandescent, Warm, Fluorescent, Natural.
Manual: Manual gain adjustment of red and blue colours for the camera video.
Auto: Optimisation according to the current lighting conditions and method of the screen and video colour calibration
of the camera video colours.
➢
Iris Type: Manual and automatic modes can be selected. The default mode is Auto.
➢
Time exposure: Camera exposure level adjustment.
➢
Gain: Automatic gain level AGC adjustment (Auto, 6dB, 12dB, 18dB, 24dB, 30dB, 36dB, 42dB).
3)
PRIVACY ZONE
Click on 【Display】→【Privacy Zone】 to access the following interface.
Privacy zone setting:
1. Click to enable the privacy zone.
2. Select the Privacy area to be activated from the available four (Window 1, Window 2, Window 3, Window 4).
DS1099-077
13
Advertisement
Table of Contents
