Table of Contents
Advertisement
➢
Type: MainStream, SubStream.
➢
The user can set: Resolution, FPS, Audio (if the camera model has audio input), Bitrate control: CBR/VBR and the
MainStream/SubStream Bitrate value.
➢
Resolution: MainStream 1080P(1920x1080), 960P(1280x960), 720P (1280×720), SubStream (704×576, 640×360,
352×288).
➢
FPS: max 20 for the Mainstream and 25 for the Substream
➢
Audio: enable/disable TLC audio input (if supported by the camera model).
➢
Rate Control: Set the Bitrate management as CBR (Constant Bit Rate) or VBR (Variable Bit Rate, at 6 quality levels
from Best to Worst.
➢
Bitrate: set the transmission speed to bits per second as manual (user-defined) or default value.
IMPORTANT NOTE:
It is possible to access the third stream of the camera which is a MJPEG stream, by inputting the following URL in any internet
browser's navigation bar:
Description:
•
IP: to be replaced with the actual IP address of the device
•
The MJPEG stream resolution can be modified in the following section: 【Advanced】→【Snapshot Settings
】
IMPORTANT NOTE:
The HTPP URL to get single JPEG snapshots is the following:
DS1099-077
http://IP/Streams/1/4/ReceiveData
http://IP/Snapshot/1/RemoteImageCapture?ImageFormat=2
15
Advertisement
Table of Contents
