Key Features - Quectel BG96-NA Hardware Design

2.2. Key Features

The following table describes the detailed features of BG96-NA module.
Table 2: Key Features of BG96-NA
Features
Power Supply
Transmitting Power
LTE Features
Internet Protocol
Features*
SMS*
(U)SIM Interface
USB Interface
UART Interface
AT Commands
Network Indication
BG96-NA_Hardware_Design
Details
Supply voltage: 3.3V~4.3V
Typical supply voltage: 3.8V
Class 3 (23dBm±2.7dB) for LTE-FDD bands
Support up to LTE Cat M1
Support 1.08MHz RF bandwidth
Support SISO in DL direction
Cat M1: Max. 375kbps (DL)/375kbps (UL)
Support TCP/UDP/PPP protocols
Support PAP (Password Authentication Protocol) and CHAP (Challenge
Handshake Authentication Protocol) protocols which are usually used for
PPP connections
Text and PDU mode
Point to point MO and MT
SMS cell broadcast
SMS storage: ME by default
Support (U)SIM card: 1.8V, 3.0V
Compliant with USB 2.0 specification (slave only); the data transfer rate
can reach up to 480Mbps
Used for AT command communication, data transmission, GNSS NMEA
output, software debugging and firmware upgrade
SupportUSB drivers forWindows XP, Windows Vista, Windows 7, Windows
8/8.1, Windows 10, Windows CE 5.0/6.0/7.0*,Linux 2.6/3.x/4.1,Android
4.x/5.x/6.0
UART1:
Used for AT command communication and data transmission
Baud rate reach up to 3000000bps; 115200bps by default
Support RTS and CTS hardware flow control
UART2:
Used for module debugging and log output
115200bps baud rate
3GPP TS 27.007 and 3GPP TS 27.005 AT commands, as well as
Quectel enhanced AT commands
OneNETLIGHT pin for network connectivity status indication
Confidential / Released 13 / 64
LTE Module Series
BG96-NA Hardware Design