Table of Contents
Advertisement
3.2. Pin Assignment
The following figure shows the pin assignment of the BG96-NA module.
NOTES
1.
Keep all RESERVEDpins and unused pins unconnected.
2.
GND pads should be connected to ground in the design.
1)
3.
PWRKEY output voltage is 0.8V because of the diode drop in the Qualcomm chipset.
4.
"*" means under development.
BG96-NA_Hardware_Design
Figure 2: Pin Assignment (Top View)
Confidential / Released 17 / 64
LTE Module Series
BG96-NA Hardware Design
Advertisement
Table of Contents
