46
C
5: G
C
HAPTER
ATEWAY
ONFIGURATION
Figure 45 Special Application Settings Screen
Or select Other to specify a suitable name for the special application and then
enter a value in the Trigger and Incoming Ports text boxes (Figure 45). These values
correspond to the outbound port number issued by the application.
The port numbers are specified using a comma-separated list, with hyphens to
denote port number ranges. So for example, entering 2, 3, 5-7 would cause ports
2, 3, 5, 6, and 7 to be activated.
The Gateway will automatically allow FTP and NetMeeting sessions. You do not
need to configure these as Special Applications.
Figure 46 Other Applications Setup Screen
3 Click Add to save your settings.
Only one computer on your network can be configured for special access at any
one time.
PCs Privileges
Figure 47 PC Privileges Screen
Select PC Privileges to display the PCs Privileges setup screen (Figure 47).
Access from the local network to the Internet can be controlled on a
computer-by-computer basis. In the default configuration the Gateway will allow
all connected computers unlimited access to the Internet.