EDWARDS SYSTEMS TECHNOLOGY EST2 Operation Manual page 90

Index
Push-to-Talk switch, 2-MIC • 2.43
R
reading 2-CMDN(-C) messages • 3.8
reading 2-LCD messages • 2.8–2.9
reading 2-LSRA(-C) messages • 3.8
reading 2-SMDN(-C) messages • 3.8
reading LEDs
on LED/switch modules • 2.40
on the 2-CMDN(-C) • 3.6–3.7
on the 2-LCD • 2.4
on the 2-LSRA(-C) • 3.6–3.7
on the 2-MIC • 2.42–2.43
on the 2-SANCOM • 3.10
on the 2-SMDN(-C) • 3.6–3.7
on the 2-TEL • 2.44
on the ISP-96-2 • 3.15–3.16
on the ISP-96-3 • 3.15–3.16
on the PT-1S • 4.2
on the RSAN-PRT • 4.4
on the SHO-4 • 3.15–3.16
on the SIGA-MDM • 2.45
on the SLU-16 • 3.11
on the SWU-8(/3) • 3.15–3.16
reading the VU meters • 3.17–3.18
reconfiguring SLCs • 2.24
Record LED, SIGA-MDM • 2.45
Record switch, SIGA-MDM • 2.46
recording voice messages • 2.45
remote alphanumeric annunciators. See 2-
CMDN(-C); 2-LSRA(-C); 2-SMDN(-C)
reports
history • 2.36–2.37
sensitivity • 2.34–2.35
Res1 indication • 2.18
resetting the panel after a fire alarm • 2.11
responses, operator
to fire alarms • 2.11
to maintenance messages • 2.13
to monitor points • 2.12–2.13
to supervisory conditions • 2.11–2.12
to trouble conditions • 2.12
to verification messages • 2.13–2.14
restarting system devices/functions. See
under CPU; history reports; SLC
restoring system functions. See under
actions; outputs; sequences. See also
LED/switch modules
RS-485 channels
disabling of • 2.29
enabling of • 2.26
RSAN-PRT • 4.4–4.5
Z.4
S
SAN annunciators • 3.9–3.18
SAN-MICII • 3.16–3.18
scrolling message review switches • 2.5
selecting system functions
on SAN annunciators • 3.15–3.16
on the 2-LCD • 2.7
selecting voice messages • 2.46
sensitivity reports
printing of • 2.35
viewing of • 2.34–2.35
sequences
activation of • 2.31
disabling of • 2.29
enabling of • 2.26
restoration of • 2.33
setting the SIGA-MDM signal level. See
MIC/Line select switch, SIGA-MDM
setting the system date • 2.22
setting the system time • 2.22
SHO-4 • 3.13
SIGA-MDM • 2.45–2.46
Signature loop controller. See SLC
Silence Call-In switch, 2-TEL • 2.44
silencing buzzers
2-CMDN(-C). See trouble silence
2-LCD. See local silence
2-LSRA(-C). See trouble silence
2-SMDN(-C). See trouble silence
2-TEL. See Silence Call-In switch
silencing NACs • See under alarm silence
SLC (Signature Loop Controller)
reconfiguring of • 2.24
restarting of • 2.24
SLU-16 • 3.11
smoke sensitivity levels
activation of • 2.32
viewing of • 2.35
SPw1 indication • 2.17
starting the test function • 2.38
status screens, 2-LCD
disabled devices/functions • 2.19–2.21
field panel status • 2.18–2.19
general • 2.16–2.17
loop • 2.17–2.18
relay/LED • 2.19
supervisory points • 2.11–2.12
switches
2-CMDN(-C) • 3.5
2-LCD • 2.4–2.5, 2.7, 2.16–2.39
2-LSRA(-C) • 3.5
2-SANCOM • 3.10
2-SMDN(-C) • 3.5
2-TEL • 2.44
EST2 System Operations Manual