Programming System Functions; Setting The System Date; Setting The System Time; Changing System Passwords - EDWARDS SYSTEMS TECHNOLOGY EST2 Operation Manual

Operating panel devices

Programming system functions

2.22
This section explains the functions of the Program switch. In the
Program mode, the 2-LCD offers the following menu options:
• Date
• Time
• Password
• RS-485 Port Communications
• System Restart
• Reconfigure (Autoprogram)
For a detailed explanation about the parameters of keypad
Note:
entries, see Making keypad entries, earlier in this chapter.

Setting the system date

To set the system date:
1. At the 2-LCD, press Program.
2. Press 1 to select Date.
3. Enter a level 3 password.
4. Enter the year (yyyy).
5. Enter the month (mm).
6. Enter the day (dd).
7. Enter the day of the week (Sun=01).

Setting the system time

To set the system time:
1. At the 2-LCD, press Program.
2. Press 2 to select Time.
3. Enter a level 3 password.
4. Enter the time (hhmmss).

Changing system passwords

To change a system password:
1. At the 2-LCD, press Program.
2. Press 3 to select Password.
3. Enter a level 3 password.
4. Change the password level (1, 2, or 3).
EST2 System Operations Manual