Table of Contents
Advertisement
Introduction
Installation and operation procedures
The typical procedure will appear in the following format:
To activate an action:
1. At the 2-LCD, press Activate.
2. Enter a level 1, 2, or 3 password.
3. Press 2 to select Action.
4. Enter the number of the action being activated (nnnn).
The word "Enter," in steps 2 and 4 implies that the operator will
press the appropriate numbers and the ENTER key on the 2-LCD
keypad. See Operating panel devices for more information.
EST2 System Operations Manual
1.5
- Quick Links:
- Trouble Conditions
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the EST2 and is the answer not in the manual?
Questions and answers
What is the procedure for replacing and programming a different style of base and smoke detector into the GE EST2 FACP?