Activating System Functions; Activating An Output; Activating An Action; Activating A Sequence - EDWARDS SYSTEMS TECHNOLOGY EST2 Operation Manual

Activating system functions

EST2 System Operations Manual
This section explains the functions of the Activate switch. In the
Activate mode, the 2-LCD offers the following menu options:
• Outputs
• Actions
• Sequences
• Primary Smoke Sensitivity
• Alternate Smoke Sensitivity
For a detailed explanation about the parameters of keypad
Note:
entries, see Making keypad entries, earlier in this chapter.

Activating an output

To activate an output:
1. At the 2-LCD, press Activate.
2. Enter a level 1, 2, or 3 password.
3. Press 1 to select Output.
4. Enter the priority and address for the output device being
activated (PPppzz).

Activating an action

To activate an action:
1. At the 2-LCD, press Activate.
2. Enter a level 1, 2, or 3 password.
3. Press 2 to select Action.
4. Enter the number of the action being activated (nnnn).

Activating a sequence

To activate a sequence:
1. At the 2-LCD, press Activate.
2. Enter a level 1, 2, or 3 password.
3. Press 3 to select Sequence.
4. Enter the number of the sequence being activated (nnnn).
Operating panel devices
2.31