Quasonix TIMTER QSX-V Series Installation And Operation Manual page 73

Actions: ds 1, cs 1, ic
•
XX.xxx for internal clock with ic = XX.xxx
Actions: ds 1, cs 1, ic XX.xxx
If ds = PNxx, then cs MAY be:
•
Nothing (defaults to internal clock at current IC rate) (displayed)
•
I for an internal clock at current IC rate (displayed)
Actions: ds 1, cs 1, id pnxx, ic
•
XX.xxx for internal clock with ic = XX.xxx
Actions: ds 1, cs 1, id pnxx, ic XX.xxx
If ds = XXXX, then cs MAY be:
•
Nothing (defaults to internal clock at current IC rate) (displayed)
•
I for an internal clock at current IC rate (displayed)
Actions: ds 1, cs 1, id XXXX, ic
•
XX.xxx for internal clock with ic = XX.xxx
Actions: ds 1, cs 1, id XXXX, ic XX.xxx
If ds = AB, then cs MAY be:
•
Nothing (defaults to clock free at current BR) (displayed)
Actions: ds 0, cs 0, ai 1, cf 0 AIR 0 br
•
X for clock free with current BR
Actions: ds 0, cs 0, ai 1, cf 0 AIR 0 br
•
AUTO for clock free with BR = auto
Actions: ds 0, cs 0, ai 1, cf 0 AIR 0 br a
•
XX.xxx for clock free with BR = XX.xxx
Actions: ds 0, cs 0, ai 1, cf 0 AIR 0 br XX.xxx
If ds = AT, then cs MAY be:
•
Nothing (defaults to clock free at current BR) (displayed)
Actions: ds 0, cs 0, ai 1, cf 0 AIR 1 br
•
X for clock free with current BR
Actions: ds 0, cs 0, ai 1, cf 0 AIR 1 br
•
AUTO for clock free with BR = auto
Actions: ds 0, cs 0, ai 1, cf 0 AIR 1 br a
65 Quasonix, Inc.
TIMTER™ Multi-mode Digital Telemetry Transmitter
(en 0 if needed)
(en 0 if needed)
(en 0 if needed)
(en 0 if needed)
(en 0 if needed)
(en 0 if needed)
(en 0 if needed)