Related Manuals for hattrick TRENDY M
Summary of Contents for hattrick TRENDY M
- Page 1 TRENDY M MOTORIZED TREADMILL USER MANUAL Special tips： Before installation and operation, please read this operation manual carefully and save this manual for future reference.
-
Page 2: Table Of Contents
Table of Contents CONTENT PAGE 1、Warranty 2、Tips for Safety 3、Packing Details 4、Explosive View 5、Part List 6、Treadmill Structure 7、Installation 8、Use Instructions 9、Guides for Console Operation 10、Detailed Instructions 11、Maintenance 12、Guides for Malfunction... -
Page 3: 1、Warranty
Acknowledgement Thank you for purchasing this item which can improve your health. 1、Warranty We make sure that this item is made of high-quality materials. In normal use, we will take charge of maintenance if any problem occurs. If the item you purchased meets problems as follows, the manufacturer’s warranty is not effective: ... -
Page 4: 3、Packing Details
fastened. Please place the item on the clean, flat and solid floor. Make sure there is nothing sharp, no source of water or hear around the machine. Please stop exercising immediately and consult your doctor or fitness coach if you’re feel giddy, surfeit, thorax ache or other symptoms. - Page 5 Hardware bag Multi-wrench 1 pcs Homemade wrench 1 pcs Umbrella-type allen screw M8*80 1pcs Umbrella-type allen screw Umbrella-type allen screw Umbrella-type allen screw M8*50 4pcs M8*35 2pcs M8*15 12pcs Umbrella-type cross tapping Nut 7pcs Washer 19pcs screw M4.2*15 4pcs Safety key 1pcs MP3 connector 1pcs Lubricant 1pcs - 3 -...
-
Page 6: 4、Explosive View
4、Explosive View： These are all the components used in installation. All components are listed in the following form. - 4 -... -
Page 7: 5、Part List
5、Part List Description Quantity No. Description Quantity Base frame Rubber transporting wheel Main frame Tube plug at base frame Left meter pillar Upper cover of meter Right meter pillar Under cover of meter Meter frame Sponge sheath on handbars Motor stator Hand heart rate&speed buttons Connecting part of base frame Hand heartrate&... -
Page 8: 6、Treadmill Structure
6、Treadmill Structure Meter Massage head Keys on the handlebar Handlebar Safety key Meter pillar Multifunction frame Motor cover Footplate Running belt Decorating cover Base frame Back cover Manual incline - 6 -... -
Page 9: 7、Installation
7、Installation Step 1: Install meter pillars Communication line Washer Screw M8x15 Screw M8x50 a) Let the communication line pass through the right meter pillar. b) Put meter pillars on the base frame. First, use 2 Screw M8*15 and 2 washers; second, use 4 Screw M8*50, 4 washers and 4 nuts to fasten meter pillars. - Page 10 Step 3: Install horizontal pipe Screw M8x15 Washer a) Put horizontal pipe to pillars, then use 4 Screw M8x15 and 4 washers to fasten the pipe. (Don’t tighten screws at first) Step 4: Install multifunction frame Washer Screw M8x80 Screw M8x35 a) Use 2 Screw M8x35, 2 washers and 2 nuts to fasten multifunction frame to base frame.
- Page 11 Step 5: Install the massage head Washer Screw M8*15 a) Use 3 Screw M8*15 to fasten the massage head. Step 6: Install decorative covers. Screw M4.2*15 Use 4 Screw M4.2*15 to fasten left and right decorative covers. Step 7: Remove the screw in base frame. Remove the screw - 9 -...
-
Page 12: 8、Use Instructions
8、Use Instructions Power: Insert the power plug and switch on the machine. The switch light will be on and you will hear a sound like “Di”. Then you will find the meter is on. Power switch Safety key： The machine can work only when safety key is put at the appointed position. Nip the other end of safety key to clothes. - Page 13 1. Stop the machine and pull two metal sticks from left and right manual incline. 2. Put two metal sticks into the relatively same hole of left and right manual incline 3. After that, adjust two metal sticks to touch the base frame 4.
-
Page 14: 9、Guides For Console Operation
9、Guides for Console Operation Specifications Time 00:00-99:59 min Speed 1.0-16.0 km/h Distance 0.00-99.9 km Calories 0-999 kcal Heart rate 50-200 / min Built-in program P1-P99 Count-down mode Time/Distance/Calories Program User-defined program U1—U3 Body measurement 1/0 (Man/Woman) - 12 -... - Page 15 Panel buttons and functions START button: Press “Start” button, the system will count down in 3 seconds, which displays on the screen! The machine will run at the speed of 1.0km/h. STOP button: Press this button to stop the running machine. Reset: Press “Stop”...
-
Page 16: 10、Detailed Instructions
Screen Display height and time Display weight and calories Display pulse Display distance and fat Display speed and sex 10、Detailed Instructions a. Quick start (Manual mode) 1. Switch power on and put the safety key at the appointed position. 2. Press “Start” button, the system will count down in 3 seconds, which displays on the screen! The machine will run at the speed of 1.0km/h. - Page 17 1. In “Time Mode”, the screen displays flashing “15：00”. Then press “SPEED △ or ▽ ” to reset time from 05：00—99：00. 2. In “Distance Mode”, the screen displays flashing “1.0”. Then press “SPEED △ or ▽ ” to reset distance from 0.5—99.9. 3.
-
Page 18: 11、Maintenance
1-MAN 0-WOMAN 10-99 HEIGHT 100-220 WEIGHT 20-150 ≤19 Thin 20—25 25—29 Overweight ≥30 Obesity Power saving： When the power is on, if the machine doesn’t work for 10 minutes, it will sleep and the screen will be off. Press any key to wake up the machine. 11、Maintenance Maintain the machine Proper maintenance can always keep the machine in good condition. - Page 19 d) If necessary, repeat Step b and c as above until the running belt runs in the middle. Deflect to the left (Diagram 1) Deflect to the right (Diagram 2) Lubricant (White bottle) All treadmills were added lubricant before packed. However, it is still necessary to add lubricant after using the machine for 30 hours or 30 days.
-
Page 20: 12、Guides For Malfunction
12、Guides for Malfunction Analyzing and eliminating malfunction Item Malfunction Reason Solution The safety key is missing Put the safety key at the right position The machine The power switch is in “0” doesn’t work Turn power switch to “1” position The meter and upper Disassemble the meter and make sure communication line are... - Page 21 Check connections of the meter and Error of communication under control and make sure they are on the screen all well connected. Make sure the weight of the user is not Overload protection overweight. If so, add lubricant to the on the screen running board.
Need help?
Do you have a question about the TRENDY M and is the answer not in the manual?
Questions and answers