Corrections & Voids; Clear; Void Item; Cancel - Sam4s SAP-6600II Operator's Manual

Corrections & Voids

Clear

Touch the CLEAR key to erase numeric entries or clear an error condition.


Void Item

Use the VOID ITEM key to void an item previously entered in a transaction. To void a previous item:
Touch the item or condiment where it is displayed – note that the item touched is now selected and

highlighted. Touch VOID ITEM key to remove the selected item or condiment.
Note: If an item is voided, condiments associated with the item are also removed.

Cancel

Use the cancel function to completely abort a transaction in progress. No totals or counters are updated for
items registered prior to cancelling a transaction. Cancel cannot be used after tendering or finalization.
Employee authority determines if the Cancel function is allowed. Cancel does not open the cash drawer.
Touch CANCEL to abort a transaction in progress.


Transaction Void

A VOID MODE key must be placed on the keyboard. If the Void Mode key is set for manager control, entry
of the manager password is required. The Void Mode key can also be set for Pop-Up or Stay-Down operation.
On the SAP-630 & SAP-530, you can turn the key lock the VOID position.
1. Touch the VOID MODE key. If required enter the manager password. The header ribbon will turn red
and show VOID MODE for the header title.
2. Enter Items to be voided. Finalize the transaction using the appropriate tender key.
3. If the Void Mode key is set for pop-up, the terminal will return to the normal Register Mode.
4. If the Void Mode key is set for stay-down; void additional transactions as necessary.
5. Touch the VOID MODE key again to exit Void Mode.

Merchandise Return

Use this function to return (credit) merchandise inside or outside of a sale.
Touch RETURN, and then register the item to be returned. Repeat for each item to be returned.

66 • Basic Operations
Sam4POS 6600/4800II Operators Manual v2.9