Initial Startup With Bodac - Bosch Rexroth VT-VSPD Series Installation And Operation Manual

20/48 Bosch Rexroth AG | Hydraulics
3 Commissioning the VSPD controller cards
3.3

Initial startup with BODAC

Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699 959
enquiries@hyquip.co.uk
After having installed the VSPD controller card in the rack and provided the read-
iness for operation as described in chapter 2.4 Installing the card, you can start
with commissioning.
Before starting the next steps make sure that the following requirements are met:
Serial interface cable (1:1 cable) available
Free serial interface available on the PC
Software BODAC is installed.
Proceeding for (initial) startup:
Connect serial interface cable (mat. no. R900776897) to the port of the VSPD
controller card.
Plug serial interface cable to the serial port (COM) on the PC.
The VSPD controller card and the PC are now connected.
Start software BODAC
Carry out software commissioning as described in the documentation "Commis-
sioning of the VSPD controller card and operation of the software BODAC".
www.hyquip.co.uk/web/index
Installation and operation | RE 30523-B/09.13