RE 30523-B/09.13 | Installation and operation
4
Operating the VSPD
4.1
Display/input keys and connections of the controller card
Display*
LEDs of digital in- / outputs.
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699 959
enquiries@hyquip.co.uk
You can use the control keys and connectors on the front panel of the VSPD to check
parameters and settings, attach diagnostic instruments and connect the card to a PC.
The graphic below shows an overview of display/control elements and connections of
the controller card.
Fig. 5 Display/input keys and connections of the controller card*
The display is four characters in length. Messages that exceed four characters are
displayed as a scrolling display.
When parameters are displayed, the negative or positive sign is indicated by the "+"
and "-" LEDs.
The LEDs (input) only signal the input signal. The LEDs (output) signal the state of the
controller card. When a signal is present on an input/output, the associated LED will
illuminate.
www.hyquip.co.uk/web/index
Hydraulics | Bosch Rexroth AG
Operating the VSPD 4
21/48