Diagnostics Test Jacks; Menu Tree For Setup And Parameters (Option Display) - Bosch Rexroth VT-VSPD Series Installation And Operation Manual

RE 30523-B/09.13 | Installation and operation
4.2

Diagnostics test jacks

4.3

Menu Tree for Setup and Parameters (Option Display)

Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699 959
enquiries@hyquip.co.uk
The diagnostics port on the front panel of the controller card can be used for connect-
ing external diagnosis instruments. You can take measurements via two analog sig-
nals.
The following contains an overview of the menus that can be selected using the but-
tons on the HACD controller card. Shown are the parameters and settings that are
available
An overview of the items listed below are shown on the following pages:
Menu tree „Parameter"
Menu tree „Setup"
Menu tree „Valve menu Part 1"
Menu tree „Valve menu Part 2"
Menu tree „Structure"
Menu tree „Command Adjust. Part 1"
Menu tree „Command Adjust. Part 2"
Menu tree „Analog I/O Part 1"
Menu tree „Analog I/O Part 2"
Menu tree „Digital I/O Part 1"
Menu tree „Digital I/O Part 2"
Menu tree „Faults"
For a detailed description of the settings and parameters, please refer to document:
"Starting up the HACD Control Card and Operation of BODAC Software".
www.hyquip.co.uk/web/index
Hydraulics | Bosch Rexroth AG
Operating the VSPD 4
23/48