Bosch Rexroth VT-VSPD Series Installation And Operation Manual page 39

Digital valve amplifier
Table of Contents

Advertisement

RE 30523-B/09.13 | Installation and operation
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699 959
enquiries@hyquip.co.uk
To show setpoints/feedback values on the display run mode.
In this example, the signal "OUT1"(see Fig. 7 Menu tree „Setup") will be used.
The card should be in Run Mode.
The display will show scrolling text to display the manufacturer's name, the software
version for the controller, or a custom configured text string.
Press and hold the "ENTER" and "ESCAPE" keys for at least 2 seconds until the
display reads "Setup".
The card is now in Configuration Mode.
Press "ENTER".
The card is at the second level of the Configuration Menu.
Press the "UP" or "DOWN" keys to select "Display".
Press "ENTER".
Menu entry "Text" is displayed.
Press the "UP" or "DOWN" keys to select "OUT1".
Press "ENTER".
The signal "OUT1" is displayed when the card returns to Run Mode.
www.hyquip.co.uk/web/index
Hydraulics | Bosch Rexroth AG
Operating the VSPD 4
39/48

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vt-vspd-1-2x/v0/1-0-1

Table of Contents