Transport, Storage And Handling The Controller Card - Bosch Rexroth VT-VSPD Series Installation And Operation Manual

RE 30523-B/09.13 | Installation and operation
2.3

Transport, Storage and Handling the Controller Card

Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699 959
enquiries@hyquip.co.uk
Notes on handling the controller card are printed on the packaging. They must be
strictly observed.
ATTENTION ATTENTION
Static Sensitive Circuits sensibles à
Devices l' électricité statique.
Handle only at Manipulation uniquement
Static Safe Work autorisée sur un poste de
Stations travail protégé.
Fig. 1 Notes for handling printed on the packaging
Comply with the following requirements:
Keep the controller card away from moisture and dust
Adhere to the permissible temperature range of
–20° C to + 70 °C.
(allowable operating temperature: 0 – 50° C)
______________________________________________________________
NOTE!
Electrostatic discharge (ESD) can result in damage to compo-
nents. To prevent this, take the following precautions.
Provide equipotential bonding to discharge static charge from your
body.
Work in a safe environment. Do not use any devices in the working
environment that generate or hold static charge. Avoid working with
the controller card in areas where floors or work surfaces are com-
posed of materials that can generate a static charge.
Handle the controller card with care. Do not touch any exposed pins
and sensitive components of the electronics.
Transport and store the controller card with care in its original pack-
aging.
______________________________________________________________
www.hyquip.co.uk/web/index
Hydraulics | Bosch Rexroth AG
Installing the VSPD 2
SDLC
ACHTUNG
Elektrostatisch gefährdete
Bauelemente.
Handhabung daher nur an
geschützten Arbeitsplätzen
erlaubt.
HACD_HW_DE_2-1
11/48