Transport, Storage And Handling The Controller Card - Bosch Rexroth VT-VRPD-2 Installation & Operation Manual

RE 30126-B/09.13 | Installation and Operation
2.3

Transport, Storage and Handling the Controller Card

The packaging contains notes on handling of the controller card. These must be strict-
ly followed.
ATTENTION
Static Sensitive
Devices
Handle only at
Static Safe Work
Stations
Fig. 1 Notes for handling printed on the packaging
Observe the following:
Keep the controller card away from moisture and dust
Observe the allowable storage temperature range of –20° C to +70 °C. (allowable
operating temperature: 0 – 50° C)
Electrostatic discharge (ESD) can damage components on the
controller card. To prevent damage, observe the following rec-
ommendations.
Discharge static voltage from your body using accepted practices.
Work in a safe environment. Do not use any devices in the working
environment that generate or hold static charge. Avoid working with
the controller card in areas where floors or work surfaces is com-
posed of materials that can generate a static charge.
Handle the controller card carefully. Do not touch any exposed pins
or electronic components.
Transport and store the control card in its original packaging.
Hydraulics | Bosch Rexroth AG
SDLC
ATTENTION ACHTUNG
Circuits sensibles à Elektrostatisch gefährdete
l' électricité statique. Bauelemente.
Manipulation uniquement Handhabung daher nur an
autorisée sur un poste de geschützten Arbeitsplätzen
travail protégé. erlaubt.
11/32
Installing the VRPD 2
HACD_HW_DE_2-1